All Categories
- Apple Products
- Gaming PC & Components
- Gaming Laptops
- Laptops & Tablets
- Monitors & Projectors
- Console Gaming
- Desktops
- Storage
- Networking Products
- Accessories & Softwares
- Smart Devices & Gadgets
Model No | Asus Rog Z11 Mini-ITX Aluminum Steel Tempered Glass ABS Plastic Case |
Part No | 90DC00B0-B39000 |
Color | Black |
Case Size | Mini Tower |
Motherboard Support | Mini-ITX Mini-DTX |
Additional Fan Support | (Top) : 2 x 120 mm,2 x 140 mm (Rear) : 2 x 120 mm |
Radiator Support | (Rear) : 120 mm,240 mm |
SSD/HDD Support | 4 x 2.5" Bay 1 x 2.5"/3.5" Combo Bay |
I/O Ports | 2 x USB 3.2 Gen1 1 x USB 3.2 Gen2 Type C 2 x USB 2.0 |
CPU Cooler Limitation | 130 mm |
VGA Limitation | 320 mm |
PSU Limitation | 160 mm (ATX or SFX) |
Tempered Glass | Front Side Right Side |
Dust Filters | Front Top Bottom |
Lighting | ARGB |
Maximum Cable Management Space | 40 mm |
Special Features | Room for Expansion This compact mid-tower case supports mini-ITX/DTX motherboards. You can install up to four 2.5" drives or two 2.5" drives alongside one 3.5" hard drive. There is also room for three PCIe devices or a 3-slot graphics card. 11-Degree Tilt Design The motherboard tray features an 11° tilt, which provides about 40mm of space at the back of the motherboard. This design isn't just eye-catching, it provides room for cable management while enhancing the heat dissipation around the CPU and graphics card in addition to M.2 SSDs that are installed near the back of the motherboard. The extra space also makes it possible to install 3-slot graphics cards without having to use a riser connector. Efficient Airflow The ROG Z11 has a cooling design that takes advantage of the "chimney effect" and the negative air pressure created when hot air is expelled at a faster rate than its intake. The included bottom-mounted 140mm fan pulls cool air in while two 140mm fans at the top blow hot air out. Additionally, up to two 120mm fans may be installed at the rear of the case. Liquid Cooling The rear of the case supports either a 120mm or a 240mm radiator and a 120mm radiator can be installed on the bottom for liquid cooling. There is room for a water-cooling pump and reservoir base above the power supply unit shroud for custom liquid cooling loops. Dual Orientation Stand the ROG Z11 vertically or lay it horizontally to fit your space or preferences. Both straight and angled power cables are included to suit either orientation. Extension Hub The built-in extension hub and advanced front panel includes one 10 Gb/s USB 3.2 Gen 2 Type-C port, two 5 Gb/s USB 3.2 Gen 1 Type-A ports, two USB 2.0 ports, and an ARGB control button. Removable Dust Filters There are removable dust filters located on the top, bottom, left, front, and back sides to help streamline cleaning and maintenance. Aura Sync RGB Lighting The ROG Z11 has integrated RGB LEDs along the front and side panels, which can be customized with a variety of different effects and synchronized with Aura Sync-compatible peripherals such as keyboards, mice, and headsets to suit your mood, game, or style. Two ROG logo nameplates — one for vertical display and the other for horizontal display — are included to complement the onboard lights. Playing with Style This case includes a tempered glass side panel, providing a full view of your system's internal components and lighting. Big on the Inside You can install a CPU cooler up to 5" tall, an ATX PSU measuring up to 6", and a 12.6"-long graphics card into the ROG Z11 mid-tower case. |
Product Size ( Dimension ) | 194 (W) x 531 (H) x 386 (D) mm 7.64 (W) x 20.9 (H) x 15.2 (D) inch |
Product Weight | 8.73 Kg |
Warranty | 1 Year ( As per Manufacturer Policy ) |
Model No | Asus Rog Z11 Mini-ITX Aluminum Steel Tempered Glass ABS Plastic Case |
Part No | 90DC00B0-B39000 |
Color | Black |
Case Size | Mini Tower |
Motherboard Support | Mini-ITX Mini-DTX |
Additional Fan Support | (Top) : 2 x 120 mm,2 x 140 mm (Rear) : 2 x 120 mm |
Radiator Support | (Rear) : 120 mm,240 mm |
SSD/HDD Support | 4 x 2.5" Bay 1 x 2.5"/3.5" Combo Bay |
I/O Ports | 2 x USB 3.2 Gen1 1 x USB 3.2 Gen2 Type C 2 x USB 2.0 |
CPU Cooler Limitation | 130 mm |
VGA Limitation | 320 mm |
PSU Limitation | 160 mm (ATX or SFX) |
Tempered Glass | Front Side Right Side |
Dust Filters | Front Top Bottom |
Lighting | ARGB |
Maximum Cable Management Space | 40 mm |
Special Features | Room for Expansion This compact mid-tower case supports mini-ITX/DTX motherboards. You can install up to four 2.5" drives or two 2.5" drives alongside one 3.5" hard drive. There is also room for three PCIe devices or a 3-slot graphics card. 11-Degree Tilt Design The motherboard tray features an 11° tilt, which provides about 40mm of space at the back of the motherboard. This design isn't just eye-catching, it provides room for cable management while enhancing the heat dissipation around the CPU and graphics card in addition to M.2 SSDs that are installed near the back of the motherboard. The extra space also makes it possible to install 3-slot graphics cards without having to use a riser connector. Efficient Airflow The ROG Z11 has a cooling design that takes advantage of the "chimney effect" and the negative air pressure created when hot air is expelled at a faster rate than its intake. The included bottom-mounted 140mm fan pulls cool air in while two 140mm fans at the top blow hot air out. Additionally, up to two 120mm fans may be installed at the rear of the case. Liquid Cooling The rear of the case supports either a 120mm or a 240mm radiator and a 120mm radiator can be installed on the bottom for liquid cooling. There is room for a water-cooling pump and reservoir base above the power supply unit shroud for custom liquid cooling loops. Dual Orientation Stand the ROG Z11 vertically or lay it horizontally to fit your space or preferences. Both straight and angled power cables are included to suit either orientation. Extension Hub The built-in extension hub and advanced front panel includes one 10 Gb/s USB 3.2 Gen 2 Type-C port, two 5 Gb/s USB 3.2 Gen 1 Type-A ports, two USB 2.0 ports, and an ARGB control button. Removable Dust Filters There are removable dust filters located on the top, bottom, left, front, and back sides to help streamline cleaning and maintenance. Aura Sync RGB Lighting The ROG Z11 has integrated RGB LEDs along the front and side panels, which can be customized with a variety of different effects and synchronized with Aura Sync-compatible peripherals such as keyboards, mice, and headsets to suit your mood, game, or style. Two ROG logo nameplates — one for vertical display and the other for horizontal display — are included to complement the onboard lights. Playing with Style This case includes a tempered glass side panel, providing a full view of your system's internal components and lighting. Big on the Inside You can install a CPU cooler up to 5" tall, an ATX PSU measuring up to 6", and a 12.6"-long graphics card into the ROG Z11 mid-tower case. |
Product Size ( Dimension ) | 194 (W) x 531 (H) x 386 (D) mm 7.64 (W) x 20.9 (H) x 15.2 (D) inch |
Product Weight | 8.73 Kg |
Warranty | 1 Year ( As per Manufacturer Policy ) |
Model No | Asus Rog Z11 Mini-ITX Aluminum Steel Tempered Glass ABS Plastic Case |
Part No | 90DC00B0-B39000 |
Color | Black |
Case Size | Mini Tower |
Motherboard Support | Mini-ITX Mini-DTX |
Additional Fan Support | (Top) : 2 x 120 mm,2 x 140 mm (Rear) : 2 x 120 mm |
Radiator Support | (Rear) : 120 mm,240 mm |
SSD/HDD Support | 4 x 2.5" Bay 1 x 2.5"/3.5" Combo Bay |
I/O Ports | 2 x USB 3.2 Gen1 1 x USB 3.2 Gen2 Type C 2 x USB 2.0 |
CPU Cooler Limitation | 130 mm |
VGA Limitation | 320 mm |
PSU Limitation | 160 mm (ATX or SFX) |
Tempered Glass | Front Side Right Side |
Dust Filters | Front Top Bottom |
Lighting | ARGB |
Maximum Cable Management Space | 40 mm |
Special Features | Room for Expansion This compact mid-tower case supports mini-ITX/DTX motherboards. You can install up to four 2.5" drives or two 2.5" drives alongside one 3.5" hard drive. There is also room for three PCIe devices or a 3-slot graphics card. 11-Degree Tilt Design The motherboard tray features an 11° tilt, which provides about 40mm of space at the back of the motherboard. This design isn't just eye-catching, it provides room for cable management while enhancing the heat dissipation around the CPU and graphics card in addition to M.2 SSDs that are installed near the back of the motherboard. The extra space also makes it possible to install 3-slot graphics cards without having to use a riser connector. Efficient Airflow The ROG Z11 has a cooling design that takes advantage of the "chimney effect" and the negative air pressure created when hot air is expelled at a faster rate than its intake. The included bottom-mounted 140mm fan pulls cool air in while two 140mm fans at the top blow hot air out. Additionally, up to two 120mm fans may be installed at the rear of the case. Liquid Cooling The rear of the case supports either a 120mm or a 240mm radiator and a 120mm radiator can be installed on the bottom for liquid cooling. There is room for a water-cooling pump and reservoir base above the power supply unit shroud for custom liquid cooling loops. Dual Orientation Stand the ROG Z11 vertically or lay it horizontally to fit your space or preferences. Both straight and angled power cables are included to suit either orientation. Extension Hub The built-in extension hub and advanced front panel includes one 10 Gb/s USB 3.2 Gen 2 Type-C port, two 5 Gb/s USB 3.2 Gen 1 Type-A ports, two USB 2.0 ports, and an ARGB control button. Removable Dust Filters There are removable dust filters located on the top, bottom, left, front, and back sides to help streamline cleaning and maintenance. Aura Sync RGB Lighting The ROG Z11 has integrated RGB LEDs along the front and side panels, which can be customized with a variety of different effects and synchronized with Aura Sync-compatible peripherals such as keyboards, mice, and headsets to suit your mood, game, or style. Two ROG logo nameplates — one for vertical display and the other for horizontal display — are included to complement the onboard lights. Playing with Style This case includes a tempered glass side panel, providing a full view of your system's internal components and lighting. Big on the Inside You can install a CPU cooler up to 5" tall, an ATX PSU measuring up to 6", and a 12.6"-long graphics card into the ROG Z11 mid-tower case. |
Product Size ( Dimension ) | 194 (W) x 531 (H) x 386 (D) mm 7.64 (W) x 20.9 (H) x 15.2 (D) inch |
Product Weight | 8.73 Kg |
Warranty | 1 Year ( As per Manufacturer Policy ) |
nextstore.com.kw gladly accepts orders from all around the GCC, Egypt, Jordan & Lebanon. Available product lines, shipping rates and fees may vary depending on the delivery address of your order.
To avail a warranty you need to ship the products back to “nextstore.com.kw”; product manuals, instructions and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with the recipient/buyer’s country standards, specifications, and labeling requirements; The recipient/buyer is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from nextstore.com.k, the recipient/buyer is the importer of record and must comply with all laws and regulations of the destination country.
Your privacy is important to us in regards to how information about your order is used and shared. International customers should be aware that cross-border shipments are subject to opening and inspection by customs authorities.
Also, we may provide certain order, shipment, and product information, such as but not limited to titles, for our international carriers, and such information may be communicated by the carriers to customs authorities in order to facilitate customs clearance and comply with local laws.
If the order is a gift, the package is marked "Gift," but the cost of the item is still stated on the customs formdue to the reason that customs authorities require the value of the gift item to be stated directly on the package.
The above terms also apply to the shipment of any replacement product that might be shipped due to a problem with the original shipment. If you return a product to us, you will be the exporter from the destination country. Title and risk of loss will be transferred to us upon receipt at our end. For additional information please use the "Contact Us" form.
You are responsible for assuring that the product can be lawfully imported to the destination country. When ordering from nextstore.com.kw, the recipient/buyer is the importer of record and must comply with all laws and regulations of the destination country. Orders that are shipped to countries outside the State of Kuwait may be subject to import taxes, customs duties and fees by the destination country’s authorities. The recipient/buyer of an international shipment may be subject to such import taxes, customs duties and fees, which are levied once a shipment reaches your country. Additional charges for customs clearance are only bearable by the recipient/buyer; we have no control over these charges and cannot predict the amount. Customs policies vary from country to country; you should contact your local customs office for further information. When customs clearance procedures are required, it can cause delays beyond our original delivery dates estimated.
You will receive a tracking number once your order is shipped. The shipping method and courier information for your package will be listed in your account and in your shipment confirmation e-mail. Blink will make sure that it will dispatch your package with in the same time frame mentioned under the product purchased. nextstore.com.k will not be responsible for any delay in delivery incurred by the courier service.
www.tnt.com , www.Aramex.com
Signature upon delivery required for all shipments .
You may return most new, unopened items sold within 3 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error, otherwise two way shipping will be charged. Return request can be sent online (Contact us) by email or by phone. Items should be returned in their original product packaging.
You will receive your refund after we receive and process your returned items ( for the items eligible for refund) . Expect your refund within 2 weeks of giving your package to the return shipper (though in many cases you'll receive the refund sooner).
This time period includes:
We'll notify you via e-mail of your refund once we've received and processed the returned item. You can view completed returns and refunds at the bottom of an order's summary page in Your Account. If the refund does not appear in Your Account within 4 weeks from the day you sent us your returned item, please contact us immediately.
Your order begins processing immediately after you click Place Your Order on the "Confirm and submit" page. During processing time it may be possible to cancel your order, but once the order moves into the shipping process, it cannot be canceled.
To attempt to cancel your order during processing:
Order Cancellation from nextstore.com.kw -
nextstore.com.kw reserves full rights to cancel the orders which are placed because of technical problems, are generated through wrong technical process or typing mistakes. In such case, customer will be approached via phone or email to intimate about his/her problem with the reason for cancellation.