كينجستون رامات الكمبيوتر المكتبي فيوري بيست آر جي بي سعة ٨ جيجابايت دي دي آر ٤، تردد ٣٢٠٠ ميجاهرتز

KINGSTON FURY BEAST 8GB (1X8GB) DESKTOP MEMORY

Kingston FURY KF432C16BB/8 is a 1G x 64-bit (8GB) DDR4-3200 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module.  Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0.  Each module has been tested to run at DDR4-3200 at a low latency timing of 16-18-18 at 1.35V.   The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V.  Each 288-pin DIMM uses gold contact fingers.

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.34” (34mm), w/heatsink

KINGSTON FURY BEAST

The Kingston FURY Beast DDR4 provides a powerful performance boost for gaming, video editing and rendering with speeds of up to 3733 MHz ¹. This cost-effective upgrade is available in 2666 MHz–3733 MHz speeds, CL15–19 latencies, single-module capacities of 4 GB–32 GB and kit capacities of 8 It features Plug N Play automatic overclocking at 2666 MHz¹ and is both Intel XMP-ready and ready for AMD Ryzen. FURY Beast DDR4 stays cool with its stylish, low-profile heat spreader. 100 percent tested at speed and backed by a lifetime warranty, it’s an easy, worry-free upgrade for your Intel or AMD-based system. Some legacy chipsets/processors from Intel prior to 8th Gen have not been updated to support memory modules featuring DDR4 16Gbit density DRAM. Check with your system or motherboard manufacturer for an updated BIOS to support 16 Gbit DRAM.
¹ FURY Plug N Play memory will run in DDR4 systems up to the speed allowed by the manufacturer’s system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer’s BIOS. FURY Plug N Play DDR4 products support XMP 2.0 specifications, so overclocking can also be achieved by enabling the built-in XMP profile.